Find answers to general questions and learn what replacement parts are available for your cot.
Yes, here are a few tips. Have pivot arm facing the end bar- have to twist base slightly to get it to point towards the end bar, then it can line up correctly. Do pivot arm corner last. Make sure secure in pivot arm divots in the end bar. Once sec
Here is a helpful video:
First, check that the cot is setup properly with the end bars securely in place and the canvas is evenly distributed. If it still sags while properly setup, you can reach out to our AMAZING product support team for assistance here. Some of our custom
The approximate sleeping dimensions of each cot can be found below:. Adventurer Cot: 22" wide x 71" longUniversal XL Cot: 27" wide x 80" longOutfitter XXL Cot: 35.5" wide x 80" long. These dimensions, and more, can be found under the Specifications t
No, camp cots aren't designed to hold weight on their side rails. We recommend that you only apply weight to the center of the cot. Sitting on the side of the cot may be tempting, but this can lead to bent rails which could ruin the cot. Bending the
Replacement Parts Website Below is a list of parts you can purchase directly from our parts website here: https://geargarage.tetonsports.com/parts-and-replacements/cot-parts/ Available for our Outfitter XXL Camp Cot, Universal Camp Cot, and Adventu
You should be able to use any metal safe lubricant to reduce/get rid of any squeaking, WD-40 would be a good one for example. Depending on how much you move around on the cot, it can make some small squeaking noise. After using some lubricant, most p